TP-Link Router Ban: Should You Replace Your Router?
The TP-Link router ban does not touch the router you own, and updates are allowed into 2029. Here is how to decide whether to keep it or replace it now.

Table of contents
You walk past the router on your hallway shelf and notice the logo for the first time in years. TP-Link. Then you remember the headlines: a federal ban, a company under investigation, routers that broke power limits. Is the TP-Link router ban about to cut off your internet?
Short answer: no. Your router will not stop working, and nobody is coming to collect it. But the rules around it changed again this month, and they decide how long your router keeps getting the security fixes that stop strangers from taking it over. TP-Link is still waiting on approval that 23 rival makers already have.
This guide explains what the ban covers, why TP-Link is still stuck, how long your updates are protected, and a simple way to decide whether to keep your router or replace it.
What the TP-Link Router Ban Actually Covers
The name is misleading. There is no rule that targets TP-Link by name. On March 23, the FCC added "routers produced in a foreign country" to its Covered List, the register of equipment the US government treats as a national security risk.
The key word is produced. The rule looks at where a router is built, not who owns the brand. That is why it reaches almost every consumer router sold in the US, since very few are assembled here. Enterprise and industrial gear sits outside it.
Being on the list means one thing in practice. A covered router cannot get a new FCC equipment authorization, and without that a new model cannot be imported or sold. The FCC's own fact sheet spells out what stays the same:
- The action "does not affect any previously-purchased consumer-grade routers." You can keep using yours.
- Stores can keep selling and importing models that were authorized before the change.
- A maker can escape the list with a Conditional Approval from the Department of War or the Department of Homeland Security.
That last point is where the brands split. According to Light Reading's November 12 tally, roughly 23 companies hold approvals. Light Reading lists Netgear's approval as running to October 1, 2027, eero's to October 31, 2027, and Asus's to March 6, 2028. Each approval carries an end date, so even the approved brands face a renewal down the line.
Why TP-Link Is Still Stuck This Month
TP-Link applied for conditional approval on a pair of Wi-Fi routers. As of mid-November, Light Reading describes that request as being "in a holding pattern", with no public action. The company was founded in China, is now based in Irvine, California, and calls the allegations about its China ties "baseless."
It has offered regulators reasons to say yes. TP-Link has pledged nearly $1 billion for US research and manufacturing. On October 19 it signed a letter of intent with Key Tronic to assemble routers at a Mississippi plant, starting with Wi-Fi 8 models, as early as next year. Today, though, every TP-Link product sold in the US comes from Vietnam.
The power-limit letters
Then came a second problem. Bloomberg reported that on October 15, the FCC's Office of Engineering and Technology told TP-Link it had tentatively found "false or incorrect information" in certification filings for four router models, after testing showed them exceeding power limits. The agency asked TP-Link to explain the discrepancy by October 30.
Power limits exist so one home's Wi-Fi does not drown out its neighbors or other radio users. A router that transmits harder than its paperwork says can look stronger in reviews than a rule-abiding rival. That is why the FCC treats a mismatch as a filing problem, not just a technical one.
These are tentative findings, not penalties. SlashGear, summarizing Bloomberg, noted that unresolved concerns could lead to fines, seized inventory or a US sales injunction. TP-Link has also not extended its Wi-Fi 8 pre-orders to the United States, and the Key Tronic plan is waiting on that FCC approval.
Will Your Router Keep Getting Security Updates?
This is the question that matters for the router you already have. It nearly went badly. FCC rules adopted on October 28 last year bar covered equipment from "permissive changes," a category that includes firmware updates. Applied strictly, that would have frozen every foreign-made router on its current software.
The FCC fixed this with waivers. Its first one allowed security patches only until January 1, 2027. Then, on May 8, the agency extended the update waiver through January 1, 2029 and widened it to cover larger Class II software changes, as long as they "mitigate harm to U.S. consumers." Hardware changes are still banned without a separate waiver.
Those separate waivers are arriving one by one. On November 5, the FCC granted the cable industry group NCTA a one-year waiver running to November 5, 2027. It lets suppliers to Comcast, Charter, Mediacom, Midco and others swap out-of-stock parts in routers they already rent to customers, as long as the radio performance stays the same. If your router came from your cable company, that order is why replacements can keep shipping.
The real risk is old firmware, not the ban
Permission to patch only helps if a patch gets installed. Take CVE-2023-1389, a flaw in the TP-Link Archer AX21. The National Vulnerability Database rates it 8.8 out of 10: an attacker on your network could run commands as root with a single request. CISA lists it in its Known Exploited Vulnerabilities catalog, meaning criminals used it in real attacks.
Firmware 1.1.4 fixed it, but any AX21 still on older software remains open today.
Keep or Replace? A Worked Example
Here is a simple way to price the decision. Say you bought a TP-Link Wi-Fi 6 router for $150 three years ago, and it still covers your home fine.
- Count the guaranteed update window. From mid-November to January 1, 2029 is about 25 months of FCC permission to patch.
- Cost it per month. If you keep the router through that window, you get 25 more months from hardware you already own. Replacing it today with a $200 router you would keep for five years costs about $3.33 a month, or around $83 across those same 25 months.
- Check the maker's own support. The FCC waiver allows updates, but it does not force anyone to write them. If your model's last firmware release is more than a year old, the waiver is protecting nothing.
So the math favors keeping a router that still gets regular firmware. It flips for a model the maker has stopped patching, because the $83 buys you fixes the old one will never get. Note also that prices for new gear are under pressure from the memory chip shortage raising device prices, so waiting does not guarantee a better deal.
If you do replace, buy from a brand on the conditional approval list, and check when its approval ends. A model launched under an approval ending in October 2027 may face fresh uncertainty sooner than one ending in March 2028.
Five Router Checks to Do This Week
None of these take long, and they matter more than the brand on the box.
- Find the model and firmware version. Log in to the router's app or admin page. Write down the model number and the firmware date.
- Compare against the maker's download page. If a newer version exists, install it. If the newest release is over a year old, start planning a replacement.
- Turn on automatic updates if the router offers them. Many newer models do, usually under a setting called auto update or scheduled update.
- Change the admin password from the default printed on the label, and switch off remote management unless you use it.
- Turn off WPS and use a guest network. Old WPS code has been a weak point for years, as the WPSplinter router flaw showed. Put smart TVs, plugs and cameras on the guest network so a hacked gadget cannot reach your laptop.
If you rent your router from your internet provider, most of this is their job. Call and ask when the unit last updated, and request a newer model if it is more than five years old.
Frequently Asked Questions
Is TP-Link banned in the US?
Not for existing products. The FCC rule blocks new foreign-made router models from being authorized, and TP-Link has not won the exemption that lets rivals launch new ones. Stores can still sell TP-Link models that were approved before March 23, and you can keep using one you own.
Do I need to replace my TP-Link router?
Only if it no longer gets firmware updates or no longer covers your home. The FCC allows security updates for already approved routers until January 1, 2029. Check the date of your latest firmware: anything older than a year is a better reason to replace than the ban itself.
Are TP-Link routers safe to use?
A TP-Link router on current firmware with a strong admin password carries roughly the same risk as other brands. The danger is unpatched software, as with the Archer AX21 flaw that CISA lists as actively exploited. The October power-limit findings concern radio output, not hacking, and remain tentative.
Which router brands are approved under the FCC ban?
About 23 companies hold conditional approvals, including Netgear, eero, Asus, Nokia, Zyxel and Calix. Each approval has an end date, according to Light Reading, from October 1, 2027 for Netgear to March 6, 2028 for Asus. TP-Link's application is still pending.
The Bottom Line
The TP-Link router ban is a rule about future models, not a recall. Your router keeps working, and the FCC has already cleared the way for security patches into 2029. What decides your safety is whether those patches actually arrive and get installed. Spend ten minutes on the checks above, keep an eye on whether TP-Link wins approval, and replace the router only when its updates dry up.
Written by
Nora Whitfield
Technology & AI
Covers the technology beat for Quick Trend Insights, with a focus on what new AI tools and consumer hardware actually change for the people using them.
Related Articles
View all
Fitbit Third-Party Apps End: What Owners Should Do Now
Fitbit third-party apps and clock faces stop installing or updating on Sense and Versa watches on November 28. What keeps working, and what to do before then.

Microsoft 365 Family Storage Cut: Who Pays More Now
Microsoft 365 Family storage now means 2TB shared by six people instead of 1TB each. See when the change hits your plan, who loses space and the cheapest fixes.

Global Privacy Control: Turn On This Browser Opt-Out
Global Privacy Control sends one opt-out to every site you visit. Edge added it, Chrome is testing it, and California requires it from January 1. Turn it on.
